Wrap the whole body skeleton with a heating wire. After plugging in, the heating wire starts to work. Wait 30-40 minutes until the temperature reaches the skin.
Matters needing attention:
1. Uneven temperature distribution?
The temperature of the heating function cannot be evenly distributed in every part of the body. The temperature depends on the distance between the parts of the body and the skeleton.
For example, the temperature of thicker parts (such as breasts or buttocks) will be lower and the heating speed will be slower, while for the positions like the arms, the temperature will be slightly higher and the heating speed will be faster. Generally, it takes about 20 minutes.
2. Cannot be heating up?
It may be the quality of the heating wire.
3. Too high temperature melts TPE?
The more frightening situation than the heating wire does not work is the failure of the temperature protection function.
The general manufacturer will install the temperature protection function, that is to say, when the heating reaches a certain temperature (usually to 38 degrees), the device will automatically cut off the power, and the heating wire will no longer continue to heat. There are also manufacturers that do not have a temperature protection function. When heated to a certain temperature, the power will not be automatically cut off, but the heating will be maintained at a constant temperature. In this case, even if the temperature is not high, the doll is likely to be burnt if it lasts for a long time.
If the device is damaged, or the manufacturer does not provide the device, do not heat it for more than 1 hour, otherwise the TPE may melt or even spontaneously ignite.
(Images from the Internet)
4. Shorten life?
The temperature stability of TPE is not good, and the inside will start to deteriorate and shorten the life span if it is heated too much. TPE and silicone are poor conductors of heat, and the temperature of the skeleton is 15-30 degrees higher than the skin temperature. The temperature inside the body is higher than the surface, so the inside may be changing quietly, although there is nothing unusual on the surface.
5. How to use it?
Heat it first, then use it. Unplug the plug after heating for about 40 minutes before using the doll. Using dolls with electricity is not recommended, as it is extremely dangerous.
For more highlights, please see www.sedoll.com
